Established in 1982, MIFAB is a Chicago-based manufacturer of commercial plumbing products. MIFAB’s handy, function driven product lines replace confusion with simplicity and offer all the features required by today’s building practices – without the unnecessary duplication.
At MIFAB’s Chicago warehouse, we manufacture custom and standard interceptors, access doors, trench drains, floor sinks, drainage products and more, providing the right accessory for your plumbing and drainage systems.
Properties & applications
BEECO Backflow Valves
C-PORT Roof Pipe Supports
Fabricated Stainless Steel Drains
Floor and Area Drains
Floor and Wall Cleanouts
Grease, Oil and Specialty Interceptors
Trap Seal Primers
Water Hammer Arrestors
Wall and Ground Hydrants
For further details please visit: https://www.mifab.com/catalogs/
FEATURES & BENEFITS:
– Universal, fire rated, recessed, security doors available
– Available in satin coated steel or stainless steel
BEECO Backflow Preventers:
– All Stainless Steel Body and Cover
– Shortest lay length in the market
– Lightest device in the market
– Best flow curves at working pressure.
C-PORT Roof Top Pipe Supports:
– UV Resistant
– Made from 100% recycled rubber
-Deep cast iron floor sinks
-Available in square, round, PVC or stainless steel.
Floor and Area Drains:
-Unique modular drain design that turns one drain into different types
-Most use same A1 body that can be used to create area drains, cleanouts, floor drains and roof drains
-Adjust AFTER the concrete pour with the F1100-C-TS Top Set Floor Drain
-Light weight, made from HDPE (High-Density Polyethylene)
-Will not crack, chip or rust
-Direct connect lid comes standard
-Multiple Inlet/Outlet Options
– H20 Load Rated Lid comes standard 20,000 lb.
MC-10 Fixture Carrier:
Universal: Same faceplate used for both siphon jet and blow-out toilets
Save Time: Bolts connect legs to the faceplate from the front
Quick Install: All bolts have a built in washer design
Easy to Use: Faceplate has easy to break off tabs set to common heights
Built-In Ruler: ½” increment ruler to get correct height
Rod Protectors: Rod protectors come preassembled to prevent mortar from affecting threads with backup nut already assembled into rods
Quick Hub Couplings:
– Installation is easy! Gasket and shield do not come apart
– Same 60-80 lb. torque requirements as regular couplings
– Three sealing rings on Quick Hub gaskets outperform others with only two sealings.
STANDARDS & APPROVALS
Standard PDI-G101 (when installed with an external, vented flow control fitting), CSA B481, ASME A112.14.3 and listed with IAPMO.
ASTM-C1277, CISPI 310, NSF and CSA B602 (File # 247608) Standards, listed with IAPMO.